Cigarette receptacle

$125.00

Cigarette receptacle

• Rain gutter to reduce rain water into the unit
• Easy installation and servicing
• Weather resistant
• Customization available (vinyl stickers)

RECEPTACLE SPECIFICATIONS

RECTANGULAR POLE-MOUNTED RECEPTACLE

Capacity:
~ 700 cigarette butts
Dimensions:
3 1/8” x 3 1/8” x 19” high
Construction:
• Fire-safe aluminum
• 100% rust-resistant
Security:
Lockable
Ash Liner:
No
Installation:
• Bolted (included)
• Steel-banded
(recommended, and instructions included)
Special Features:
• Rain gutter to reduce rain water into the unit
• Easy installation and servicing
• Weather resistant
• Customization available (vinyl stickers)
Purchase:
• To order a receptacle visit https://zerowasteboxes.terracycle.com/pages/litter-prevention-solutions
• For custom orders please email litter@terracycle.com

SINGLE ORDER:
• Includes one (1) receptacle and three (3) generic stickers
SET OF SIX (NO STICKERS):
• Includes six (6) receptacles
SET OF SIX (CUSTOM STICKERS):
• Includes six (6) receptacles and twenty five (25) custom stickers

RECEPTACLE SPECIFICATIONS

GENERIC

CUSTOM

Please email itter@terracycle.com to order custom stickers

STEEL-BANDING INSTALLATION

MATERIALS NEEDED:

Purchasable : http://www.uline.com/BL_2905/Stainless-Steel-Strapping

INSTALLATION INSTRUCTIONS

Three vinyl stickers should be applied to each receptacle (these stickers are customizable).
Check each lamp pole or post against the installation map (varies per location).
Measure 40 inches from ground level. The bottom of the receptacle should be 40 inches from ground level when installed.
Ensure that the receptacle is vertically level and the front faces the sidewalk.
Measure the stainless steel band on the circumference of the pole.
Pass the band through the top portion of the mounting bracket.
Tighten the band.
Repeat the steps above with the lower band.
Check that the receptacle is tightly mounted by alternately placing light pressure against the sides of the receptacle.
Cut off the excess banding.

SERVICING INSTRUCTIONS

INSTRUCTIONS

Receptacles must not reach a fill rate of more than 85% (safety precaution).
Receptacles must be closed securely after emptying.
Place a bag or bucket beneath the receptacle, raising the rear edge at least two inches behind the receptacle between the receptacle and the pole.
Hold the bag/bucket with one hand.
With the other hand unlock the receptacle door with the receptacle key. Please note that the servicer will be required to keep and safeguard the receptacle keys.
Tap the side of the receptacle gently to dislodge any material lodged inside.
Close and lock the receptacle.
Aggregate all collected cigarette waste and seal in trash bags.